| | Use this with a Back-up Camera, DVD or any other video system.
 Specifications »LCD
»12 Volt (9-15 Volts as supplied by a vehicle battery.)
»Resolution: 320X240
»RCA input
»Works on PAL & NTSC Includes »Monitor. »Built in Stand with Adhesive. »1.1 meter (3.5 feet) power extension cable. | Installation Option #1 Adjustable Stand: Easiest option, no tools necessary.
Adhesive included on bottom of stand. Fastens to any area near the driver. Adjust angle and/or rotate for best viewing.
Installation Option #2 Surface Mount: Requires basic skills to operate tools.
Remove stand with needle nose pliers. Use Adhesive (not included) to mount monitor to a flat surface on or near the dash. Drill a hole in the dash that will be covered by the monitor. Feed the cable from the back of the monitor through the hole. Once the monitor is in place, the hole & cables are out of sight. 
Installation Option #3 Flush Mount: Requires skills to operate tools & remove dash.
Remove stand with needle nose pliers. Remove screws & back panel of monitor. With the dash or panel removed from the vehicle, trace a template (see example below) at the desired location. Use a jig-saw to cut the template pattern. Drill holes for the mounting screws. Use the screws to fasten the monitor. 
|
